2-View Wall Projection Signs
An alternative to flat signs, Visi-Signs™ stand out from the wall, allowing for viewing from two directions. Made from durable 3mm thick ultra PVC. Projects from wall at a 90 degree angle. Features pre-drilled mounting holes for fast and easy installation. Excellent fire properties with a UL 94 V-0 flammability rating.
3-View Wall Projection Signs
An alternative to flat signs, Visi-Signs™ stand out from the wall, allowing for viewing from multiple directions. Made from durable 3mm thick ultra PVC. Projects from wall at a 45 degree angle. Features pre-drilled mounting holes for fast and easy installation. Excellent fire properties with a UL 94 V-0 flammability rating.
ADA and Office Signs
Identify locations throughout your facility and comply with ADA requirements at the same time with our attractive signs for a variety of uses. 2010 ADA Standards for Accessible Design 216.2 “Tactile text descriptors are required for pictograms that are provided to label or identify a permanent room or space. Pictograms that provide information about a room or space…are not required to have text descriptors.”
Admittance and Security Signs ensure all areas of your workplace are clearly marked for access. These signs give direction to employees and visitors on demarcation of access, of potential hazards, and demarkation of restricted areas. Security Signs deter unwanted visitors from your property as well as communicate security practices in and around your facility.
Spanish is the second-largest spoken language in the United States, after English. In today’s workforce, it is common to have a combination of English and Spanish speaking employees working together. Post Bilingual signs to communicate safety throughout your entire facility. Regulation ANSI Z535.2 “…in certain areas of the country where other languages are used, consideration should be given to provide messages in those languages”
Post signs around your facility identifying areas where hazardous chemicals and other materials are stored and used. Regulation 29 CFR 1910.1001(j)(4)(i) “Warning signs shall be provided and displayed at each regulated area. In addition, warning signs shall be posted at all approaches to regulated areas so that an employee may read the signs and take necessary protective steps before entering the area.”
dangers include entrapment, fumes and proximity injury in areas such as bins, tanks, vaults and silos, and may require permitting and/or mitigating procedures and equipment. Avoid unsafe and potentially deadly situations. Stay in compliance with these high-quality, durable signs. 29 CFR 1910.146(c)(2) “If the workplace contains permit spaces, the employer shall inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces. NOTE: A sign reading DANGER -- PERMIT-REQUIRED CONFINED SPACE, DO NOT ENTER or using other similar language would satisfy the requirement for a sign.”
These non-electric, photoluminescent exit signs absorb and store energy from ambient light, require no electricity or batteries, and are immediately visible in the dark.
in the workplace range from high voltage service (over 600 volts) to unexpected lines and cables, to access space for work or servicing, and locations to shut power off. Regulation 1910.303(h)(5)(iii)(B) “Permanent and conspicuous warning signs shall be provided, reading substantially as follows: ‘DANGER -- HIGH VOLTAGE -- KEEP OUT.’”
are presented by heavy equipment, moving machine parts, powered vehicles, etc. Make sure guards are in place where needed, as well as warning signs that point out easily hidden hazards in and around the workplace. Regulation 29 CFR 1910.145(c)(3) “Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures.”
Help remind drivers of various safety precautions to ensure everyone in the area is safe from possible injury. This category of signs include truck wheel chock signs, truck and delivery signs, clearance level signs, and other miscellaneous instructions for drivers. Every sign is protected with Sign Muscle™ for free making it the most durable sign in the industry.
Display information which informs people where they should go in the event of a fire or other emergency. Clearly mark the shortest and quickest route to exit the property and minimize accidents. Stay in compliance with these high-quality, durable signs protected by Sign Muscle™ – for free. Choose from a wide variety of our stock products or create your own custom message. Call us today 708-841-6464
Fire Extinguisher Signs
Indicate the locations of required fire suppression equipment around the facility. Available in pressure sensitive, rigid plastic, aluminum and glow materials in an assortment of sizes. NFPA 10 184.108.40.206.3 “Where signs are used to indicate the fire extinguisher location, the signs shall comply with the following: (1)They shall be located in close proximity to the fire extinguisher. (2) They shall be visible from the normal path of travel.”
Proper first aid signage is a crucial element to avoid accidents that are waiting to happen at your facility. Employees or customers must be clearly directed to first aid stations and medical treatment to ensure a safe work environment. Stay in compliance and promote safety.
Maintain a clean and orderly workplace for sanitary and safety reasons. Post housekeeping signs throughout your facility to remind workers of maintenance initiatives and proper health practices. 29 CFR 1910.22(a)(1) “All places of employment, passageways, storerooms, and service rooms shall be kept clean
and orderly and in a sanitary condition.”
IMO markings highlight important information and emergency equipment on maritime vessels.
- Fire Control Sign
- Safety Of Life At Sea Emergency Signs
- Emergency Equipment and Embarkation Stations
- 6” x 6” Glow vinyl or rigid plastic
- Indoor/outdoor use
can help avoid one of OSHA’s Top 10 Violations annually. See 29 CFR 1910.147 Appendix A for sample procedures to help your facility achieve compliance with the standard.
Near flammable liquids, “smoking shall be prohibited except in designated localities. ‘No Smoking’ signs shall be conspicuously posted where hazard from flammable liquid vapors is normally present.”
Remind workers of safety precautions needed where dangerous or toxic substances or hazardous work conditions may exist. Post signs reminding workers of the protective equipment required for employees to protect themselves on the job. 29 CFR 1926.502(a)(2) “Employers shall provide and install all fall protection systems required for an employee, and shall comply with all other pertinent requirements of this subpart before that employee begins the work that necessitates the fall protection.”